Inovative Inventions Inc. is the new home of the iconic Oil Pan Pillow. Along with the Oil Pan Pillow,  we are excited to announce the introduction of a  brand new product for the tire repair business. Specifically manufactured for the manual tire changer, the Tire Bar Glove is the missing link that takes the tire changer to the next level.

 

For those of you that are not familiar with the Oil Pan Pillow, simply put, the Oil Pan Pillow Is an inflatable bladder that is used in the towing industry. It's purpose is to keep the oil pans on front wheel drive vehicles from impacting  the wheel lift during transport. The Oil Pan Pillow has been around for over 20 years with over 4500 units sold throughout North America and over seas. If you have have been thinking of adding the Oil Pan Pillow to your operation, there has never been a better time to buy. There are several unadvertised specials taking place right now so measure up your wheel lift and contact us for a quote. Free shipping to Canada and USA excluding Alaska and Hawaii.

Duties and tariffs excluded. All prices in Canadian Dollars. All major credit cards accepted. Orders shipped within 48 hours. Additional discounts on multiple unit orders.

​​

There are 9 common sizes of Oil Pan Pillow, and there are 2 measurements you need to supply when you order. The width of the wheel grid tubing which will either be 3, 3.5, 4, 4.5, 6.5 inches, and the space between the center pivot point where the tubing comes out from either side. The space will be 8, 9, 12, 13, 16, and 17 inches depending on wheel lift model. Basically, the legs are an upside down "U" that slides over the tubing on either side.

 

​Common Sizes and Part #:

OPP-PRO-0830-10      08 IS SPACE BETWEEN LEGS     03 IS WIDTH OF LEGS     10 is the DIAMETER OF TUBE

OPP-PRO-0935-10

OPP-PRO-1235-10

OPP-PRO-1365-10

OPP-PRO-1435-10

OPP-PRO-1665-1

OPP-PRO-1735-10

OPP-PRO-1740-10

OPP-PRO-1745-10

 

 

 

 

 

 

Call, text, or email with any questions you may have.   780 908-6560   inovativeinventionsinc@gmail.com

 

 

​WHAT IS THE TIRE BAR GLOVE

​​​

If you have ever thought of purchasing a manual tire changer but shied away after discovering the problem of damaging mag rims. I stumbled across the Manual Tire Changer when researching how to get tires off the rims to save a little money. I was blown away when people were commenting you could pick one up for $30.00 to $50.00US. I am in Canada and managed to pickup one at princess auto for $69.99CAN. Just to use it to take the 4 tires off the rims paid for its self so I had nothing to loose. If you are not "As graceful as a train wreck" when using it works just fine. The biggest problem is that the tongue portion of the tire bar which slides between the tire and the rim is metal and will definitely damage your mag rim. Some have said they tried using duct tape with minimal success. 

I will go into more detail with the launch of the new site, but I will say this. Other than the mag damaging issue, anyone that can change a tire, can use this product. Especially for those who live far away from a tire repair shop, this unit is going to save you a "S" pile of money and time and if you believe time is money. This is a one time investment that will pay for its self after the first and use last for years to come. 

​

NOW, THE MISSING LINK HAS COME TO MARKET AND IS GOING TO TAKE THIS PRODUCT TO A WHOLE NEW LEVEL. THE MISSING LINK IS THE TIRE BAR GLOVE. The Tire Bar Glove is a extra heavy duty sleeve that slides over the metal tongue, removing all possibility of damaging mag rims. In the near future I will be releasing a complete video that will take you through, step by step the removal and replacement of a tire on rim and a few modifications  I thought made sense. I also found the other  end of the Tire Bar that is to be used to put the tire back on, to be "all but totally useless". The attachment on the opposite end to get the tire back on is very difficult if not impossible to use. In the video I will show you how to do the complete change using only the tongue end of the tire bar. No expensive and complicated attachments required to get the job done! By now I am sure you are wondering the cost. projected release cost will be $29.99 with free shipping within Canada and the USA. Details will supplied when product is ordered.

 

 

 

 

 

RESERVE YOUR TIRE BAR GLOVE TODAY

IF YOU ARE INTERESTED IN PURCHASING A TIRE BAR GLOVE, PLEASE SEND AN EMAIL REQUESTING TO ORDER INCLUDING THE FOLLOWING INFORMATION. QUANTITY AND CONTACT INFORMATION TO TIREBARGLOVE@GMAIL.COM